Smart Electric Trailer Brake Controller

Smart Electric Trailer Brake Controller

Looking for a trailer brake controller to safely tow heavy loads while with your Trailer? Our brake controller was created to provide you with easy gain and level adjustment, giving you proper tow settings each time your drive around with a trailer attached.

Light duty, timed-relay brake controller designed for use on single and tandem braking axle trailers. No level adjustment is required. Automatic and manual braking.

The Synchronizer is a brake controller for single and tandem axle trailers equipped with electric brakes. It modulates and controls the current from the battery to the trailer brakes. The longer the brake pedal is depressed the greater the current delivered to the trailer brakes until the preset brake power setting is reached.

Digital time-based circuitry with automatic and user-adjustable settings

FEATURES

Easy and Versatile Mounting: The Synchronizer can be mounted at any angle and in any direction, and is ideal for steep dashes that make typical units difficult to mount. It includes a mounting bracket and a standard four-wire hookup for quick and easy installation. It must be mounted in a location where the driver can see the Red Indicator Light. The driver must be able to reach and operate the manual slide.

Automatic Operation with Digital Display and Sleep/Standby Modes: The automatic mode modulates and controls the current from the battery to the trailer brakes and operates on time-based circuitry. The longer the brake pedal is depressed, the greater the current delivered to the trailer brakes. The current will increase until it reaches the preset brake power adjustment setting. The Power Wheel is used to adjust the amount of current to the trailer brakes. It is responsible for obtaining smooth, proportional, and optimum tow vehicle and trailer brake responsiveness. To increase the amount of current, rotate the power wheel upward toward the top of the case. To decrease the amount of current, rotate the power wheel downward toward the bottom of the case.

Manual Operation and Override: The Manual Slide Lever is located on the front right side of the controller. The further the manual slide lever is moved from the right to the left, the greater the amount of trailer braking power. The manual slide lever operation is an independent circuit and overrides the power wheel adjustment to allow full braking effort when required. Use the Manual Slide Lever to apply the trailer brakes independently of the tow vehicle brakes or to override the automatic trailer brakes when more braking or less braking is required. The manual slide lever is used in emergency stop situations when more braking may be required than is available with the power wheel adjustment or for control of excessive trailer sway. The indicator light will illuminate from dim to bright as the manual lever is applied and remains off when the manual lever is released. The tow vehicle and trailer brake stoplights will still illuminate during the manual lever activation.

More of features, so that you don’t hesitate to buy it!!!!!

• Quik-Connect feature.
• For all single and tandem axle trailers equipped with electric brakes.
• Designed for use on any 12-volt negative ground vehicle.
• The full 12-volt output is provided with manual lever activation.
• Superior responsiveness.
• The fully adjustable gain setting wheel.
• Compatible with all electronic systems. (ABS, cruise, etc.)
• Wide range of mounting positions; perfect for steep dash surface mounting.
• Easy adjustment and standard four-wire hookup.
• Trailer/Tow vehicle stoplights operate when trailer brakes are applied automatically or with a manual lever.
• The Red L.E.D. indicator displays braking intensity and warns of short circuit.
• Provides automatic and manual braking.
• Built-in automatic current limiter protection from trailer brake wiring shorts.

PACKAGE CONTENT

1x Trailer brake controller kit

Domestic Shipping (USA): Your trailer brake controller will be packaged and shipped within 3 days of ordering. Keep in mind our items are custom made and shipped from warehouses across the globe which means it may take them 7 to 29 business days to arrive after shipment (most of the time closer to 18).

International Shipping: The brake controller will be packaged and shipped within 5 days of order. We do ship worldwide! Please be patient and note that delivery times will vary depending on your location. The majority of the countries will have the best electric brake controller delivered within 2 to 5 weeks!